The Assembly Quality Of The Elevator Shall Meet The Following Requirements:

①There should be no obvious damage to the decorative surface of doors and windows. Partial abrasions and scratches on each door and window should not exceed the requirements in Table 1.

② There should be no obvious color difference on the colored surfaces of adjacent components on doors and windows.

③There should be no aluminum chips, burrs, oil spots or other stains on the surface of doors and windows. There should be no escaping adhesive at the assembly connections.

④The size deviation of door and window frame shall comply with the provisions of Table 2.

⑤ The assembly gap between the door and window frames and the adjacent components of the fan and the height difference of the same plane shall comply with the requirements in Table 3.